首頁>>化學材料>>TMC 工程流體-電子氟化液>>FLUTE PP1
Flutec™ PP1 電子氟化液(F2 Chemicals,全氟己烷類,分子量 338):沸點 57°C、介電強度 >16 kV/mm,用於氣密性檢測(Gross Leak Testing)、浸沒式冷卻、熱傳導與精密清洗,可對應 3M Fluorinert FC-72 的應用。經 TMC 供應,崇浩光電台灣供貨,提供原廠 TDS/SDS。
壺裝(Jug):12 lb / 5.4 kg / 0.9 gal / 3.2 L
桶裝(Pail):50 lb / 22.7 kg / 3.6 gal / 13.5 L
桶槽(Drum):750 lb / 340 kg / 53.4 gal / 202 L
樣品(Sample):2.2 lb / 1 kg / 0.2 gal / 0.6 L
由 TMC 亞洲總代理崇浩光電自桃園蘆竹倉庫出貨;現貨數量與交期依包裝而異,請透過本頁詢價表單確認。
Flutec™ PP1 廣泛用於取代 3M™ Fluorinert™ FC-72,適用於以下應用:
🔹 氣密性檢測 (Gross Leak Testing) – 適用於電子封裝與密封性測試
🔹 浸沒式冷卻 (Immersion Cooling) – 高效冷卻電子與高功率元件
🔹 熱傳導應用 (Heat Transfer Applications) – 提供穩定導熱性能
🔹 精密清潔 (Precision Cleaning) – 清除電子與工業部件的微污染物
CAS#: 355-04-4
Country of Origin: United Kingdom
🔹 熱傳導 (Heat Transfer) – 用於電子設備與半導體冷卻
🔹 電子製造 (Electronics Manufacturing) – 適用於封裝、測試與散熱管理
🔹 精密清潔 (Precision Cleaning) – 高效去除微粒、油脂與殘留物
🔹 氣密性檢測 (Gross Leak Testing) – 測試電子元件的密封完整性
Flutec™ PP1 具備 卓越的冷卻、清潔與材料兼容性,是 3M™ FC-72 的 最佳替代方案,適用於 電子、半導體、數據中心與工業應用。
| 3M FC-72 | Flutec PP1 |
Appearance | Clear Colorless | Clear Colorless |
Molecular Weight | 338 | 338 |
Boiling Point (1 atm) | 56 oC | 57 oC |
Pour Point | -90 oC | -90 oC |
Estimated Critical Temperature | 449K | 451K |
Estimated Critical Pressure | 1.83 x 106 pascals | 1.834 x 106 pascals |
Vapor Pressure | 30.9 x 103 pascals | 29.4 x 103 pascals |
Latent Heat of Vaporization (at normal boiling pt) | 88J/g | 85.5 J/g |
Liquid Density | 1680 kg/m3 | 1682 kg/m3 |
Kinematic Viscosity | 0.38 centistokes | 0.39 centistokes |
Absolute Viscosity | 0.64 centipoise | 0.656 centipoise |
Liquid Specific heat | 1100 J kg-1 C-1 | 1090 J kg-1 C-1 |
Liquid Thermal Conductivity | 0.057 W m-1 oC-1 | .065 W m-1 oC-1 |
Co-efficient of Expansion | 0.00156 oC-1 | 0.00159 oC-1 |
Surface Tension | 10 dynes/cm | 11.1 dynes/cm |
Refractive Index | 1.251 | 1.2564 |
Water Solubility | 10 ppm | 10 ppm |
Solubility in Water | <5 ppm | <0.1 ppm |
Ozone Depletion Potential (ODP) | 0 | 0 |
Dielectric Strength | 38 kV, 0.1” gap | >16 kV/mm |
Dielectric Constant | 1.75 |
|
Electrical Resistivity | 1015 ohm cm | > 1013 ohm.cm |
TEMPERATURE (°C) | RESULT (mPa s) |
-100 | 21.5 |
-80 | 7.5 |
-60 | 3.6 |
-40 | 2.15 |
-20 | 1.5 |
0 | 0.99 |
20 | 0.72 |
40 | 0.54 |
60 | 0.41 |
80 | 0.32 |
100 | 0.257 |
115 | 0.22 |
| TEMPERATURE (°C) | DENSITY (g/ml) |
| 10 | 1.7610 |
| 20 | 1.7326 |
| 30 | 1.7031 |
| 40 | 1.6728 |
| 50 | 1.6410 |
| 0 | 6.1 |
| 20 | 7.9 |
| 40 | 9.6 |
| 60 | 11.3 |
| 80 | 13.1 |
| 100 | 14.8 |
| 120 | 16.6 |
| 140 | 18.3 |
| 160 | 20.1 |
| 180 | 21.8 |
| 200 | 23.5 |
| 220 | 25.3 |
| 240 | 27.0 |
✅ Flutec™ PP1 被認為是生物與化學惰性物質 (Biologically and Chemically Inert),但仍應遵循良好的實驗室操作規範。
✅ 如果存放於原始密封容器中,Flutec™ PP1 具有無限保存期限 (Indefinite Shelf Life if Properly Stored in Sealed Container)。
✅ 可根據需求提供安全數據表 (Safety Data Sheets Available on Request)。
✔ 全球暖化潛勢 (Global Warming Potential, GWP) 超過 150,需符合環保法規標準。
✔ TSCA 註冊 (Toxic Substances Control Act, TSCA)
✔ 揮發性有機化合物 (VOC) 規範
✔ PFAS 法規與分類
✔ 含氟氣體法規 (F-Gas Regulations)
Flutec™ PP1 具備 高穩定性與環保優勢,適用於 熱傳導、電子製造、精密清潔與密封測試,同時符合 TSCA、EPA、ECHA 及 F-Gas 最新法規標準。
可以評估。Flutec™ PP1 的沸點 57°C、密度 1682 kg/m³、介電強度 >16 kV/mm、分子量 338等物性可對應 3M™ Fluorinert™ FC-72 的氣密性檢測(Gross Leak Testing)、浸沒式冷卻、熱傳導與精密清洗應用;3M 已停產 Novec™/Fluorinert™ 系列,導入前建議比對原廠 TDS,並索取樣品在您的實際製程中驗證。
標準包裝為壺裝(Jug):12 lb / 5.4 kg / 0.9 gal / 3.2 L、桶裝(Pail):50 lb / 22.7 kg / 3.6 gal / 13.5 L、桶槽(Drum):750 lb / 340 kg / 53.4 gal / 202 L、樣品(Sample):2.2 lb / 1 kg / 0.2 gal / 0.6 L。另有樣品可供評估測試。
崇浩光電為 TMC 亞洲總代理,由桃園蘆竹倉庫出貨;現貨數量與交期依包裝而異,請填寫本頁詢價表單或來電,我們會回覆報價、交期與樣品安排。
可以。本頁提供原廠技術數據表(TDS)與安全數據表(SDS)下載;其他文件可透過詢價表單索取。
Flutec™ PP1 is a Flutec™ perfluorocarbon fluid manufactured by F2 Chemicals (UK), supplied in Taiwan through TMC by Yottadeft (崇浩光電), TMC’s master distributor for Asia. With a boiling point of 57 °C, a density of 1682 kg/m³, dielectric strength above 16 kV/mm and a molecular weight of 338, it is used for gross-leak testing, immersion cooling, heat transfer and precision cleaning. It covers the same applications as 3M™ Fluorinert™ FC-72, which 3M has discontinued; compare the TDS and qualify a sample in your own process before switching.
Packaging: Jug 12 lb / 5.4 kg / 0.9 gal / 3.2 L; Pail 50 lb / 22.7 kg / 3.6 gal / 13.5 L; Drum 750 lb / 340 kg / 53.4 gal / 202 L; Sample 2.2 lb / 1 kg / 0.2 gal / 0.6 L. Stock ships from Taoyuan, Taiwan; the TDS and SDS are available on this page. Request a quote or a sample via the form below.
| Molecular Weight | 338 | 338 |
| Boiling Point (1 atm) | 56 oC | 57 oC |
| Pour Point | -90 oC | -90 oC |
| Vapor Pressure | 30.9 x 103 pascals | 29.4 x 103 pascals |
| Latent Heat of Vaporization(at normal boiling pt) | 88J/g | 85.5 J/g |
| Liquid Density | 1680 kg/m3 | 1682 kg/m3 |
| Kinematic Viscosity | 0.38 centistokes | 0.39 centistokes |
| Absolute Viscosity | 0.64 centipoise | 0.656 centipoise |
| Liquid Specific heat | 1100 J kg-1 C-1 | 1090 J kg-1 C-1 |
| Liquid Thermal Conductivity | 0.057 W m-1 oC-1 | .065 W m-1 oC-1 |
| Surface Tension | 10 dynes/cm | 11.1 dynes/cm |
| Ozone Depletion Potential (ODP) | 0 | 0 |